|
| SN Series |
 |
Split plummer block housings. |
|
Suitable for ball bearings and spherical roller bearings. |
|
Shaft diameter range 20 – 200 mm. |
|
Direct or adapter sleeve mounting. |
|
Grease lubrication. Suitable for relubrication. |
|
High grade grey cast iron. S.G. iron or cast steel can be supplied on request. |
|
Felt seals. |
|
Eye bolts for easy handling (from size 224/320/524/620). |
| SMR SN series plummer blocks are suitable for general engineering applications where bearings are subjected to moderate loads & speeds & are required to work within a relatively clean and temperate environment. |
| SN housings are of split type and are equipped with felt seals. For bearing housings where the bearings are to be axially located, suitable locating rings can be used. For use in adverse environments, bearing housings can also be supplied fitted with horizontal labyrinths seals. However SMR recommends using its advanced range of housings for challenging environments. |
| For relubrication arrangement, SMR can provide SN series housings specially fitted with grease nipples on request. |
| Types of SN series |
| SN 500 series – Suitable for bearings of series 1200K, 2200K, 22200K, 23200K having tapered bore & mounted on adapter sleeves. |
| SN 600 series – Suitable for bearings of series 1300K, 2300K, 21300K, 22300K having tapered bore & mounted on adapter sleeves. |
| SN 200 series – Suitable for bearings of series 1200, 2200, 22200 CC, 23200 CC having cylindrical bores. |
| SN 300 series – Suitable for bearings of series 1300, 2300, 21300 CC, 22300 CC having cylindrical bores. |
